NETGEAR GC110 User Manual page 328

Insight managed 8-port gigabit ethernet smart cloud switch with 2 sfp fiber ports
Hide thumbs Also See for GC110:
Table of Contents

Advertisement

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Table 74. Detailed port statistics (continued)
Field
STP State
Admin Mode
Flow Control Mode
LACP Mode
Physical Mode
Physical Status
Link Status
Link Trap
Packets RX and TX 64 Octets The total number of packets (including bad packets) received and transmitted
Packets RX and TX 65-127
Octets
Packets RX and TX 128-255
Octets
Packets RX and TX 256-511
Octets
Description
The port's current Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state. The states are defined in IEEE 802.1D:
Disabled
Blocking
Listening
Learning
Forwarding
Broken
The port control administration state:
Enable. The port can participate in the network (default).
Disable. The port is administratively down and does not participate in the
network.
Indicates whether flow control is enabled or disabled for the port. This field is not
valid for LAG interfaces.
The Link Aggregation Control Protocol (LACP) administration state, which is one
of the following:
Enable. The port is allowed to participate in a LAG, which is the default
mode.
Disable. The port cannot participate in a LAG.
The port speed and duplex mode. In autonegotiation mode, the duplex mode
and speed are set by the autonegotiation process.
The port speed and duplex mode.
Indicates whether the link is up or down.
Indicates whether or not the port sends a trap when link status changes:
Enable. The switch sends a trap when the link status changes.
Disable. The switch does not send a trap when the link status changes.
that were 64 octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received and transmitted
that were between 65 and 127 octets in length inclusive (excluding framing bits
but including FCS octets).
The total number of packets (including bad packets) received and transmitted
that were between 128 and 255 octets in length inclusive (excluding framing bits
but including FCS octets).
The total number of packets (including bad packets) received and transmitted
that were between 256 and 511 octets in length inclusive (excluding framing bits
but including FCS octets).
Monitor the System
328

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc110pGc510pGc510pp

Table of Contents