NETGEAR GC110 User Manual page 50

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
• If you select the DayLight Saving (DST) Recurring, Recurring EU, or Recurring
USA radio button, configure the settings that are shown in the following table.
Field
Begins At
Ends At
Offset
Zone
• If you select the DayLight Saving (DST) Non Recurring radio button, configure the
settings that are shown in the following table.
Field
Begins At
Ends At
Offset
Zone
8. Click the Apply button.
Your settings are saved.
Description
These fields are used to configure the start values of the date and time.
• Week. Configure the start week.
• Day. Configure the start day.
• Month. Configure the start month.
• Hours. Configure the start hour.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Week. Configure the end week.
• Day. Configure the end day.
• Month. Configure the end month.
• Hours. Configure the end hour.
• Minutes. Configure the end minutes.
Configure recurring offset in minutes. The valid range is 1–1440 minutes.
Configure the time zone.
Description
These fields are used to configure the start values of the date and time.
• Month. Configure the start month.
• Date. Configure the start date.
• Year. Configure the start year.
• Hours. Configure the start hour.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Month. Configure the end month.
• Date. Configure the end date.
• Year. Configure the end year.
• Hours. Configure the end hour.
• Minutes. Configure the end minutes.
Specify the number of minutes to shift the summer time from the standard time. The
valid range is 1–1440 minutes.
Specify the acronym associated with the time zone when summer time is in effect.
This field is not validated against an official list of time zone acronyms.
Configure System Information
50