View The Vlan Status - NETGEAR GC110 User Manual

Insight managed 8-port gigabit ethernet smart cloud switch with 2 sfp fiber ports
Hide thumbs Also See for GC110:
Table of Contents

Advertisement

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 25. Advanced VLAN membership
Field
VLAN Name
VLAN Type

View the VLAN Status

You can view the status of all currently configured VLANs.
To view the VLAN status:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4.
Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5.
Select Switching > VLAN > Advanced > VLAN Status.
The VLAN Status page displays.
Definition
The name for the VLAN that you selected. It can be up to 32
alphanumeric characters long, including blanks. VLAN ID 1 always
uses the name Default.
The type of the VLAN you selected:
Default (VLAN ID = 1). Always present.
Static. A VLAN that you configured.
Dynamic. A VLAN created by GVRP registration that you did not
convert to static, and that GVRP can therefore remove.
Configure Switching
105
Access the Switch
on page 11.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc110pGc510pGc510pp

Table of Contents