View The Dual Image Status - NETGEAR GC110 User Manual

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports

View the Dual Image Status

You can view information about the active and backup images on the switch.
To view dual image status information:

1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select Maintenance > File Management > Dual Image > Dual Image Status.
The Dual Image Status page displays.
The following table describes the information available on the page.
Table 68. Dual Image Status information
Field
Image1 Ver
Image2 Ver
Current-active
Next-active
Image1 Description
Image2 Description
Description
The version of the image1 code file.
The version of the image2 code file.
The currently active image on this switch.
The image to be used on the next restart of this switch.
The description associated with the image1 code file.
The description associated with the image2 code file.
Perform Maintenance Tasks
298
Access the Switch on page 11.