Thermo Scientific Orbitrap Fusion Lumos MS Getting Connected Manual page 4

Orbitrap Fusion MS
Low Voltage Directive 2014/35/EU
This device complies with Low Voltage Directive 2014/35/EU and the harmonized safety standard IEC/EN/CSA/
UL 61010-1, 3rd Edition.
EMC Directive 2014/30/EU and other EMC test standards
This device was tested by TÜV Rheinland of North America and complies with the following EMC standards:
47 CFR 15, Subpart B, Class A: 2012
CISPR 11: 2009 + A1
AS/NZS CISPR 22: 2009 + A1
ICES-003: 2012
EN 55011: 2009 + A1
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
CAUTION Read and understand the various precautionary notes, signs, and symbols contained inside
this manual pertaining to the safe use and operation of this product before using the device.
In compliance with international regulations: This instrument must be used in the manner specified by Thermo Fisher
Scientific to ensure protections provided by the instrument are not impaired. Deviations from specified instructions on
the proper use of the instrument include changes to the system and part replacement. Accordingly, order replacement
parts from Thermo Fisher Scientific or one of its authorized representatives.
EN 61326-1: 2013
EN 61000-3-2: 2006 + A1 + A2
EN 61000-3-3: 2008
EN 61000-4-2: 2009
EN 61000-4-3: 2006 + A1 + A2
FCC Compliance Statement
Notice on the Proper Use of
Thermo Scientific Instruments
EN 61000-4-4: 2004 + A1
EN 61000-4-5: 2006
EN 61000-4-6: 2009
EN 61000-4-8: 2010
EN 61000-4-11: 2004