Table of Contents
Advertisement
RCD 272BTi
SOUND SETTING
Press the [ EQ ] button to enter sound effect setting mode. First press
shows current EQ. Rotate the knob to changes DSP EQ in this order:
OFF -> POP -> ROCK -> CLASSIC -> JAZZ -> CUSTOM
Rotate the knob to changes CUSTOM, and press the knob, the
press [
] or [
] button to select it including: BASS-G -> BASS-F
->BASS-Q -> MID-G -> MID-F ->MID-Q ->TREBLE-G -> TREBLE-F,
rotate the knob to select a value.
Press the [ EQ ] button, then press [
USER preset including:
BALANCE -> FADER -> LOUD -> SUBW FRE-> SUBW VOL, rotate
the knob to select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
LOUD: ON/OFF
SUBW FRE: THROUGH -> 80 -> 120 -> 160
SUBW VOL: (-6) - (+6)
10
manual
] or [
] button to select
STEERING WHEEL CONTROL
In any mode, press and hold [ DISP ] button to enter system setup. Press
[
] or [
] button SWC SET is displayed.
1. At SWC menu, Rotate the knob to select a function, then press and
hold a button on the steering wheel (if your steering wheel support
the function) until the SET OK is shown and the unit will return to
normal mode. Now the function is saved in the button.
2. Repeat step 1 to set functions of other steering wheel buttons.
3. Exit the setting menu and you can operate the player by the buttons
on the steering wheel.
4. If you want to change the setting, enter the SWC setting menu, select
a function on the screen, press and hold a button on the steering
wheel more than 2 seconds, then the function is saved into the button
on steering wheel. At the same time, all other steering wheel settings
are clear, you must reset them.
Advertisement
Table of Contents
