Viewing A Program; Checking The Compatibility Of Programs - Leica AutoStainerXL Instructions For Use Manual

5.4.8 Viewing a program

5.4.9 Checking the compatibility of programs

Leica AutoStainer XL – Automated slide stainer
To view a program:
1. Select the program
2. Press [F3] View.
Up to four steps can be viewed simultaneously. Use the
to view other steps.
3. Press [F4] to return to the previous screen.
This function is used to check whether two programs can be run simultane-
ously. Programs cannot be run in parallel if they need would need to control
two identical stations defined as "exact" simultaneously, or if they contain
two identical stations in reverse order, as in the following example:
Program 1
Station 1
Station 2
Station 3
However, the instrument carries out this calculation automatically.
1. Select the program
2. Press [F2] Edit.
3. Press [F1] More.
4. Press [F2] Check.
5. Using the and
compatibility.
6. Press [F2] Check.
A message appears in the display to inform you of whether or not the
programs are compatible.
7. If the programs are not compatible, an explanation will be given. Press
[F4] to continue.
8. Repeat items 5 and 6 to check the compatibility with other programs.
5.
(see items 1 and 2 on page
Program 2
Station 1
Station 3
Station 2
(see items 1 and 2 on page
keys, select the program number to be checked for
Operating the Instrument
25).
and
25).
keys
29