Setup Submenu: Security - Aaeon PICO-BSW1 User Manual

3.6

Setup submenu: Security

Change User/Administrator Password
You can set a User Password once an Administrator Password is set. The
password will be required during boot up, or when the user enters the Setup
utility. Please Note that a User Password does not provide access to many of
the features in the Setup utility.
Select the password you wish to set, press Enter to open a dialog box to enter
your password (you can enter no more than six letters or numbers). Press
Enter to confirm your entry, after which you will be prompted to retype your
password for a final confirmation. Press Enter again after you have retyped it
correctly.
Removing the Password
Highlight this item and type in the current password. At the next dialog box
press Enter to disable password protection.
Chapter 3 – AMI BIOS Setup 58