S convert Introduction and Features Introduction Thank you for purchasing the S convert stereo line level converter from Samson Audio! S convert provides a convenient solution for matching levels and interfacing audio devices, either on stage or in the studio. The S convert is a specially designed miniature level matching device that allows you to convert stereo –10dBV (RCA) signals like those from...
S convert Front and Rear Panel Layout Front Panel Layout +4 RIGHT INPUT- XLR balanced input for connecting right, +4 dBu input signals. -10 OUTPUT RIGHT- RCA con- nector outputs the right side -10 +4 LEVEL - Control knob used to adjust dBV signal.
Operating the S convert The basic procedure for setting up and using your S convert is simple and takes only a few minutes. Remove all packing materials (save them in case of need for future service) and check to make sure that you remove the supplied AC power adapter. •...
Operating the S convert Typical Set-up The diagram below shows a typical set-up for a project recording studio using the S con- vert to match the levels of a consumer CD player to the correct operating level of a profes- sional DAT recorder.
S convert Wiring Guide Wiring Guide There are several ways to interface the S convert, depending on your exact set-up. Follow the cable diagrams below for connecting your gear.
18 VDC adapter Dimensions 5.65” L x 4.13” W x 2” H (144mm L x 105mm W x 51mm H) Weight 16.5 oz., 419 gm. Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888...