Programming The Ring Signal - Aastra Dialog 4187 Plus User Manual

²
¯ ·
or
² ³
u
¯ ·
or
² ³
d
Dialog 4187 Plus

Programming the ring signal

By programming, you can adjust the ring character and ring
volume. To change the ring character and volume, you have to
enter the programming mode.
Programming the ring volume
You can choose between four settings for the ring volume: auto,
low, medium and high.
Note: The default setting is
starts in a low volume, the third and fourth ring signal are in
a medium volume and the fifth and following signals are in
a high volume.
In idle mode:
Press.
Select the RINGER VOLUME
Press.
The display shows the current setting and a request to lift the
handset (in order to hear the sound).
RINGER VOLUME
FOR AUDIO LIFT HANDSET A
The in the lower right corner shows the current ringer volume
A
setting, the available settings are:
=Auto, =Low, =Medium and
A L M
Lift the handset.
AUTO LOW MEDIUM
Select , ,
The phone rings with the selected volume.
Press to save and exit.
Replace the handset.
. The
AUTO AUTO
menu.
=High
H
HIGH
or .
Settings
ringing
79