Programming Of Ring Signal - Aastra Dialog 4106 Basic User Manual

u
¥
¥
d
Dialog 4106 Basic/Dialog 4147 Medium

Programming of ring signal

By programming, you can adjust the ring character and ring
volume. To change the ring character and volume, you have to
enter the programming mode.
Programming the ring character and volume for the
Dialog 4106
The ring signal character can be adjusted with three different
characters, each with another three volume levels.
Lift the handset.
Wait for the dial tone.
#
Press.
Press.
z
Enter digit from the table below.
Digit (character)
1
2
3
4
5
6 (default)
7
8
9
0
Notes:
Default setting is digit 6. If you choose 0, the ring signal will
be turned off until the next time you go off hook.
Please note also that you will not hear the ring signal during
programming.
Press.
The selected ring signal is stored.
Replace the handset to finish the procedure.
Ring character
– Repetition rate
1 time
1 time
1 time
4 times
4 times
4 times
10 times
10 times
10 times
None
Settings
Ring volume
Soft
Medium
Loud
Soft
Medium
Loud
Soft
Medium
Loud
Off
21