Installing The Air Shroud - Dell EMC PowerEdge R440 Installation And Service Manual

Figure 27. Removing the air shroud
Next step
If applicable, install the air shroud.

Installing the air shroud

Prerequisites
1 Follow the safety guidelines listed in
2 If applicable, route the cables inside the system along the system wall and secure the cables by using the cable latch.
Steps
1 Align the tabs on the air shroud with the slots on the system.
2 Lower the air shroud into the system until it is firmly seated.
When firmly seated, the memory socket numbers marked on the air shroud align with the respective memory sockets.
Safety instructions.
Installing and removing system components 43