Initializing Tpm For Bitlocker Users; Initializing The Tpm 1.2 For Txt Users - Dell EMC PowerEdge R440 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge R440:
- Installation and service manual (122 pages) ,
- Installation and service manual (120 pages)
Table of Contents
Advertisement
Initializing TPM for BitLocker users
Initialize the TPM.
For more information, see http://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.
Initializing the TPM 1.2 for TXT users
1
While booting your system, press F2 to enter System Setup.
2
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3
From the TPM Security option, select On with Pre-boot Measurements.
4
From the TPM Command option, select Activate.
5
Save the settings.
6
Restart your system.
7
Enter System Setup again.
8
On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9
From the Intel TXT option, select On.
Installing and removing system components
103
Hide quick links:
Advertisement
Table of Contents
