System Board Jumper Settings - Dell EMC PowerEdge R440 Installation And Service Manual

Item Connector
8. RGT_CP_CONN
9. SYS_PWR_CONN(P1)
10. J_PIB_SIG1
11. J_PIB_SIG2
12. J_ACE
13. J_CP_USB2
14. J_SATA_A1
15. J_SATA_C1
16. PCIE_G3_X8(CPU1)
17. J_REAR_BP_PWR1
18. J_FRONT_VIDEO
19. INT_USB_3.0
20. NVRAM_CLR
21. PWRD_EN
22. SLOT6
23. SLOT5
24. SLOT4
25. J_TPM_MODULE
26. J_BP_SIG0
27. J_MEZZ_A1
28. BATTERY
29. PCIE_G3_X16(CPU1)
30. A6, A5, A10, A4, A9, A7, A1, A8, A2, A3
31. B3, B2, B1, B4, B5, B6
32. CPU2
33. PCIE_A0
34. CPU2_PWR_CONN(P3)

System board jumper settings

For information on resetting the password jumper to disable a password, see the Disabling a forgotten password section.
132 Jumpers and connectors
Description
Right panel connector
System power connector
Power interface board signal connector 1
Power interface board signal connector 2
Internal Dual SD Module
Front USB connector
Internal SATA A connector
Internal SATA C connector
Internal PERC controller connector
ODD power connector
VGA connector
USB connector
Clear NVRAM
Reset BIOS password
PCIe slot 6
PCIe slot 5
PCIe slot 4
TPM module connector
Backplane signal connector
LOM riser card connector
Battery connector
Riser 1 connector
Memory module sockets
Memory module sockets
Processor socket 2
NVMe connector
CPU2 power connector