Installing The Optical Drive - Dell EMC PowerEdge R440 Installation And Service Manual

Figure 81. Removing optical drive
Next step
Install an optical drive.

Installing the optical drive

Prerequisite
Follow the safety guidelines listed in
Steps
1 Align the optical drive with the optical drive slot on the front of the system.
2 Slide in the optical drive until the release tab snaps into place.
Figure 82. Installing optical drive
Next steps
1 Connect the power and data cables to the connector on the optical drive and the connector on the system board.
NOTE: Route the cable properly on the side of the system to prevent it from being pinched or crimped.
92 Installing and removing system components
Safety instructions.