User Level - Siemens RWF 50.2 Installation, Use And Maintenance Instructions

Changing the setpoints
Timeout
34/68
20089337

6.3 User level

This level is started from the basic display.
Setpoints SP1, SP2 or dSP can be altered.
*
From the basic display, press
*
so that SP1 appears
Press
*
and SP1 flashes
Press
*
Press or
Timeout after about 180 seconds.

Note!
If the setpoint is not stored, the basic display changes after the timeout
former setpoint is maintained.
The value changes only within the permitted range.
so that OPr appears
to adjust the required setpoint and press to confirm
tout
and the