Installation - Siemens RWF 50.2 Installation, Use And Maintenance Instructions

10.10 Installation


Note!
First, install PC software ACS411; then, connect the controller. If not observed, an
error message is delivered.
PC software ACS411 is supplied on a CD.
*
Insert CD in the CD or DVD drive.
Setup starts automatically.
*
Follow the instructions appearing on the screen.
*
Connect PC and controller via the USB cable.
New hardware is identified and USB driver installed.
This may take a few minutes.
*
Follow further instructions given on the screen and wait until the installation is
successfully completed.
53/68
20089337