Table of Contents
Advertisement
Assembly Instructions / Power2 800-M
2
Safety
Cover all connections on the low-pressure and high-pressure stage so that no foreign ob-
jects can enter the low-pressure or high-pressure stage.
Mechanical hazards when working on the low-pressure and high-pressure stage
Physical hazards due to rotating parts
The rotor can rotate due to the stack draught alone. Contact with rotating
parts can cause severe injury.
WARNING
Secure rotor against turning.
Mechanical hazards
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
WARNING
cedures.
Observe the general rules for occupational safety and prevention of acci-
dents.
Ensure workplace safety.
Only perform operations that are described in this document.
Only perform operations for which you have previously received instruc-
tion or training.
Hazards due to operating materials and supplies
Operating materials and supplies can include: Oils, greases, coolants, cleaning agents and
solvents, acids or similar substances.
Handling operating materials and supplies
Swallowing or inhaling vapours of operating materials and supplies or con-
tact with them may be harmful to health. Flammable and combustible operat-
WARNING
ing materials and supplies can catch fire or resulting vapours can lead to an
explosion.
Do not breathe in these substances and avoid contact with the skin.
Ensure proper ventilation.
Observe the information in the material safety data sheet for the operating
materials and supplies.
Comply with local legislation.
Wear safety goggles.
Wear safety gloves against mechanical risks.
Wear a respiratory mask to protect against gases.
© Copyright 2016 ABB. All rights reserved.
HZTL455311P0010
Page 8 / 21
Revision -
March 2016
Advertisement
Table of Contents
