Assembly Instructions / Power2 800-M
Weight and transportation of the low-pressure and the high-
3
pressure stages
3
Weight and transportation of the low-
pressure and the high-pressure stages
Lifting gear with a sufficient load limit must be used for installing the low-pressure and high-
pressure stages. The following weight specifications apply to the heaviest variant possible.
Depending on the specification, the weight specified on the rating plate may be lower than the
standard values specified here.
Figure 3: Suspending the low-pressure and high-pressure stages
A
Low-pressure stage
B
High-pressure stage
Power2
Product
850 LP
Low-pressure stage
850 HP
High-pressure stage
Table 4: Weights of the low-pressure and high-pressure stages
© Copyright 2016 ABB. All rights reserved.
HZTL455311P0010
Page 9 / 21
Weight [kg]
1800
700
Revision -
March 2016