IBM DS8000 User Manual page 87

10. Read the license agreement and click your acceptance or nonacceptance of the
agreement. If you accept, the Next button is highlighted. Click Next to
continue or click Cancel to exit the installation. When you click Next, the
Destination Directory window is displayed.
11. Choose the directory on the Destination Directory window where you want to
install the application by using one of the following options. Clicking Next
after any of the options causes the server installation checking window (a
window for each server) to display if the DS Storage Manager Server or the
DS Network Interface Server is installed on your system. If the two servers are
not installed on your system, then the Server Parameters window is displayed.
a. Click the Next button to accept the default (recommended) directory that is
shown in the Linux Destination Directory window.
b. Type a fully qualified directory path into the Directory Name path to
designate your own directory. Then click the Next button.
c. Click the Browse button and a directory window is displayed. Scroll to the
directory that you want to use for the application. Click it and click OK.
The directory path is displayed in the Directory Name field. Click Next to
continue.
d. Click Cancel to exit the installation process.
12. Observe the message on each of the next two server installation checking
windows, and click Next on each window to continue. If the servers have not
been installed, the Server Parameters window is displayed with default values
in the input fields. Go to Step 13 to proceed with the Server Parameters
window.
The DS Storage Manager Server Installation Checking window is displayed if
the DS Storage Manager server is already installed on your system. A message
is displayed on the window that indicates which version of the server is
installed and whether the installation process installs a newer version of the
server. To continue the installation process, you must click Next, or click
Cancel to exit the installation process.
When you click Next, the DS Network Interface Server Installation Checking
window is displayed with a message. This message indicates the version of
the DS Network Interface server that is installed on your system and whether
the installation process installs a newer version of the server. To continue the
installation process, you must click Next, or click Cancel to exit the
installation process.
When you click Next, the Installation Confirmation window is displayed if the
two servers are already installed on your system. If your installation process
has taken you through these two checking windows, go to Step 19 on page 62
to proceed with the installation.
13. Click Next after you ensure that all the fields on the Server Parameters
window contain acceptable values. All fields must contain a value before you
can proceed to the next step. You can change the default values by supplying
the following information:
a. Host Name — The host name of the physical machine where the DS
Storage Manager Server is installed. The host name must resolve to a
physical network node on the server. When multiple network cards exist
in the server, the host name or IP address must resolve to one of the
network cards. The value that you specify for the host name is used as the
value of the hostName property in WebSphere Application Server
configuration files. Specify the host name value in one of the following
formats:
Chapter 3. Installing on the Linux operating system
59