IBM DS8000 User Manual page 65

To install the DS Storage Manager on the Windows operating system using
graphical mode, perform the following steps:
1. Log on as a user with administrator authority.
2. Insert the IBM System Storage DS Storage Manager CD into the CD-ROM
drive. The IBM System Storage DS Storage Manager program starts within 15
- 30 seconds if you have autorun mode set on your system. The LaunchPad
window is displayed.
If the LaunchPad window does not display, go to the CD-ROM drive using
Windows Explorer or a command prompt and perform one of the following
steps:
v Type LaunchPad at the command prompt and press Enter. The LaunchPad
window is displayed.
v Locate and double-click the LaunchPad.bat reference in Windows Explorer.
Note: If you are viewing the folder with Windows Explorer with the option
selected to hide the extensions for unknown file types, find the
LaunchPad file with the file type of MS-DOS Batch file.
The following options are available in the Launchpad window:
DS8000 Storage Manager overview
Provides information about the IBM System Storage DS Storage Manager
software.
Readme file (recommended selection)
Provides updated product information that was not provided in these
installation instructions.
User's guide
Provides specific installation instructions.
DS8000 Storage Manager Web site
Provides information from the product Web site.
Installation wizard
Starts the IBM System Storage DS Storage Manager installation program.
Post installation tasks
Provides information about setting up the IBM System Storage DS Storage
Manager.
Exit
Exits the IBM System Storage DS Storage Manager LaunchPad program.
3. Click the Readme file selection on the LaunchPad to check for information
that might supersede the information in this guide.
4. Click the Installation wizard selection on the LaunchPad to start the
installation program.
Note: The LaunchPad window remains open behind the installation wizard so
that you can access product information during the installation process.
There might be a slight delay while the software loads on your system. After
the software loads, a DOS prompt window opens to display the following
message:
Initializing InstallShield Wizard...
Preparing Java (tm) Virtual Machine .............................
. ......................................................
Chapter 2. Installing the Simulated DS8000 Storage Manager
37