IBM DS8000 User Manual page 83

b. If one or both of the servers are not installed or have to be upgraded on
your system, they are installed or upgraded in the following order (the
progress of the installation is indicated on the associated progress
window):
1) DS Storage Manager Server Installation Progress window
2) DS Network Interface Server Installation Progress window
Note: You can click Cancel (not recommended) during the DS Network
Interface Server installation process. The process does not stop
immediately when the Cancel button is clicked. Rather, the process
continues to install all the files that are associated with this part of
the installation. These files remain installed and are not reinstalled
upon reactivation of the installation process. A confirmation
message is displayed asking you to affirm that you want to cancel
the installation.
c. The Components Installation Progress (displaying the installation or
upgrade progress of the DS Storage Manager product applications) is
displayed after the servers have been installed or upgraded.
Note: You can click Cancel (not recommended) during the components
installation process. The installation process stops immediately when
the Cancel button is clicked. A window with a confirmation
message opens. For a new installation, when you confirm that you
want to stop the process, all the files that have been copied up to
the point that the Cancel button was clicked are uninstalled.
When this part of the installation is completed, if no system restart is
required, the system starts both servers: first the DS Network Interface Server
and then the DS Storage Manager Server. Wait for the servers to be started
before proceeding to the next step. When the servers have been started, the
Installer Finish window opens with the result of the installation process
(successful or unsuccessful).
If a system restart is required, the Installer Finish window is displayed, which
asks you to restart the system. Click Next on the Finish window. The Installer
Reboot window is displayed. Choose the default selection Yes, restart my
computer on the Reboot window, and then click Finish. Both servers, first the
DS Network Interface Server and then the DS Storage Manager Server, start
automatically after the restart.
16. Click Finish to exit the installation process. When the installation process
exits, a file (postinstallation.txt) is displayed that contains the post installation
tasks. Follow the instructions in this text file to complete the post installation
tasks.
Note: If the installation fails, you must end the installation process and check
the install log for error messages.
17. If the Finish window indicates that the installation fails, check the installation
log for error messages. The installation log is located in xxx\logs\install.log,
where xxx is the destination directory where the IBM System Storage DS
Storage Manager is installed (for example, c:\Program Files\IBM\DS8000
Storage Manager).
Errors fall into two categories: system or incorrect values that are designated
during the installation process. Use the following guidelines to correct these
errors.
Chapter 2. Installing the Simulated DS8000 Storage Manager
55