IBM DS8000 User Manual page 72

44
DS8000 User's Guide
the parameter default value to the value that you want for that option. You
must enclose all values in double quotation marks ("<value>").
v Verify that all paths generated or modified in the response file are correct.
There are some cases when the generated file displays an incorrect string
representing the path of the installation location. For example, the
parameter "-P installLocation = "C:Program FilesMy Product"" is wrong and
must be "-P product.installLocation = "<directory where you want the DS
Storage Manager installed>""
v Ensure that the entered values for the ports values are available and not
used by other applications on your system. Use the command "netstat -a" to
verify the ports in use on your system.
v Specify two passwords for the SSL keys files. These passwords must
observe the following criteria:
– The password must be a minimum of six characters and it cannot contain
any blanks.
– Allowable characters are letters A - Z and a - z, digits 1 - 9, and special
characters - and _ (hyphen and underscore).
– Use the following options within the responsefile.txt file to set these
options:
- For the keystore file use:
-W wasSslConfiguration.keystorePassword="your_keystore_password"
- For the truststore file use:
-W wasSslConfiguration.truststorePassword="<your_truststore_password>"
Note: These options do not have default values. If you do not set
these values, the installation process fails.
5. Save the modifications to the response file.
6. Type the following command at the command prompt and press the Enter
key on your keyboard to start the installation process in unattended (silent)
mode: setup.exe -options <responsefile-path>\<responsefile> -silent where
v responsefile-path — represents the path where the response file resides.
v responsefile — represents the relative name of the response file that you used
or created (for example, responsefile.rsp or responsefile.txt).
7. Wait for the installation program to install the product. This can take 5 - 10
minutes.
Note: During this processing, the installation process checks to see if the DS
Storage Manager server and DS Network Interface Server are already
installed and if they are the current version or have to be upgraded. If
they are already installed and need to be upgraded, the installation
process performs this function using the already set values from the
previous server installation, found on the system in the server
configuration files, for all the associated values. The specified values in
the response file are ignored.
8. If required, perform a system restart to complete the installation. After the
system has restarted, the two servers (DS Storage Manager server and DS
Network Interface Server) are automatically started by the system.
9. Verify that the DS Storage Manager server and IBM System Storage DS
Network server are operating. From the Windows Control Panel, select