IBM DS8000 User Manual page 80

52
DS8000 User's Guide
a. Type LaunchPad at the command prompt and press Enter. The LaunchPad
window opens.
b. Locate and double-click the LaunchPad.bat reference in Windows Explorer.
Note: If you are viewing the folder with Windows Explorer with the
option that hides the extensions for unknown file types, use the
LaunchPad file with the file type of MS-DOS Batch file.
The following options are available in the Launchpad window:
DS8000 Storage Manager overview
Provides information about the IBM System Storage DS Storage Manager
software.
Readme file (recommended selection)
Provides last minute product information that was not provided in these
installation instructions.
User's guide
Provides specific installation instructions.
DS8000 Storage Manager Web site
Provides information from the product Web site.
Installation wizard
Starts the IBM System Storage DS Storage Manager installation program.
Post installation tasks
Provides information about configuring the IBM System Storage DS
Storage Manager.
Exit
Exits the IBM System Storage DS Storage Manager LaunchPad program.
3. If you are installing from a CD, click the Readme file selection on the
LaunchPad to check for updated information.
4. Click the Installation wizard selection on the LaunchPad to start the upgrade
program.
Note: The LaunchPad window remains open behind the installation wizard so
that you can access product information during the upgrade process.
There might be a slight delay while the software loads on your system. After
the software loads, a DOS prompt window opens to display the following
message:
Initializing InstallShield Wizard...
Preparing Java (tm) Virtual Machine .............................
. ......................................................
The Welcome window of the IBM System Storage DS Storage Manager
upgrade program displays if no problems are discovered during the initial
system check. If an error is discovered (for example, the operating system
does not match the prerequisite), an error message is displayed and the
upgrade program exits.
5. Click Next to continue, or click Cancel to exit the upgrade process. When you
click Next, the License Agreement window opens.
Note: Anytime you click Cancel on any of the upgrade windows, a message
asks you to confirm that you want to exit.