Danfoss ECL Comfort 210 Operating Manual page 95

Operating Guide ECL Comfort 210/296/310, application A275/A375
3.4 Monitoring temperatures and system components
This section describes the function in general for the ECL Comfort
210 / 296 / 310 series. The shown displays are typical and not
application related. They might differ from the displays in your
application.
Boiler circuit
The overview display in the boiler circuit ensures a quick overview
of the actual and (desired) temperatures as well as the actual state
of the system components.
Display example:
49 °C Boiler temperature
(45) Desired boiler temperature
25 °C Return temperature
(35)
Return temperature limitation
The display example is from an A375 application with 4 boilers. In
the A275 applications, the display will only show 1 boiler.
Heating circuit
The overview display in the heating circuit ensures a quick
overview of the actual and (desired) temperatures as well as the
actual state of the system components.
Display example:
49 °C Flow temperature
(31) Desired flow temperature
Return temperature
24 °C
(50)
Return temperature limitation
DHW circuit
The overview display in the DHW circuit ensures a quick overview
of the actual and (desired) temperatures as well as the actual state
of the system components.
Display example (heat exchanger):
50 °C
Flow temperature
(50)
Desired flow temperature
- -
Return temperature: sensor not connected
(30) Return temperature limitation
VI.GU.L2.02
Display example with heat exchanger:
© Danfoss | 2017.09 | 95