Danfoss ECL Comfort 210 Operating Manual page 45

Operating Guide ECL Comfort 210/296/310, application A275/A375
2.3.2 Mounting the Remote Control Units ECA 30 / 31
Select one of the following methods:
• Mounting on a wall, ECA 30 / 31
• Mounting in a panel, ECA 30
Screws and rawlplugs are not supplied.
Mounting on a wall
Mount the base part of the ECA 30 / 31 on a wall with a smooth
surface. Establish the electrical connections. Place the ECA 30 /
31 in the base part.
Mounting in a panel
Mount the ECA 30 in a panel using the ECA 30 frame kit (order code
no. 087H3236). Establish the electrical connections. Secure the
frame with the clamp. Place the ECA 30 in the base part. The ECA
30 can be connected to an external room temperature sensor.
The ECA 31 must not be mounted in a panel if the humidity
function is to be used.
VI.GU.L2.02
Before removing the ECL Comfort controller from the base part, ensure
that the supply voltage is disconnected.
© Danfoss | 2017.09 | 45