Optimization - Danfoss ECL Comfort 210 Operating Manual

Operating Guide ECL Comfort 210/296/310, application A275/A375

5.6 Optimization

The section "Optimization" describes specific application related
issues.
The parameters 'Auto saving' , 'Boost' , 'Optimizer' , 'Total stop' are all
related to heating mode only.
'Summer, cut-out' determine, at rising outdoor temperature, the
stop of heating.
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
VI.GU.L2.02
© Danfoss | 2017.09 | 121