Danfoss ECL Comfort 210 Operating Manual page 151

Operating Guide ECL Comfort 210/296/310, application A275/A375
5.10.2 Temp. monitor.
MENU > Settings > Alarm
Upper difference
The alarm is activated if the actual flow / duct temperature increases more
than the set difference (acceptable temperature difference above the desired
flow / duct temperature). See also 'Delay' .
See Appendix "Parameter ID overview"
OFF: The related alarm function is not active.
Value: The alarm function is active if the actual temperature
gets above the acceptable difference.
MENU > Settings > Alarm
Lower difference
The alarm is activated if the actual flow / duct temperature decreases more
than the set difference (acceptable temperature difference below the desired
flow / duct temperature). See also 'Delay' .
See Appendix "Parameter ID overview"
OFF: The related alarm function is not active.
Value: The alarm function is active if the actual temperature
gets below the acceptable difference.
VI.GU.L2.02
Upper difference
1x147
=
X Time
=
Y Temperature
=
# 1 #
Upper difference
=
# 2 #
Desired flow temperature
Lower difference
1x148
=
X Time
=
Y Temperature
=
# 1 #
Lower difference
=
# 2 #
Desired flow temperature
© Danfoss | 2017.09 | 151