Hyper Terminal setup a new connection with virtual COM port
5.
On the File menu, click New Connection.
6.
In the Name box, type a name that describes the connection.
7.
In the Icon box, click the appropriate icon, and then click OK.
8.
In the Connect to dialog box, choose which port you want to use in the Connect using drop-down box. In this case,
choose COM9 (as created in Step-4)
9.
Set the parameter like below, click "Apply" to take effect.
Figure 4-32 Example: HyperTerminal Configuration screen
Figure 4-33 Example: HyperTerminal Configuration screen
-35-
User's Manual of ICS-10x