1. Package Contents Thank you for purchasing PLANET GUP-805A 100/1000BASE-X SFP to 10/100/1000BASE-T 802.3bt PoE++ Media Converter series. In the following sections, the term “GUP-805A series” means the GUP-805A-60W or GUP-805A-95W. Model PoE Standard LAN Port Speed SFP Slot Speed Budget IEEE 802.3af/...
Page 4
If any item is missing or damaged, please consult the dealer from whom you purchased your GUP-805A series Gigabit Ethernet 802.3bt PoE++ Media Converter. The GUP-805A-60W and GUP-805A-95W comes with one vacant SFP module slot. The mini GBIC SFP module is not included in the package.
2. Product Features Physical Port z Media conversion between 10/100/1000BASE-T 100BASE- FX/1000BASE-SX/LX z Copper RJ45 interface with Data + Power output z Copper port supports 10/100/1000BASE-T auto-negotiation and auto- MDI/MDI-X. z Fiber media allows - Multi-mode fiber using LC connector - Single-mode fiber using LC connector Power over Ethernet z Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE z Backward Compatible with IEEE 802.3at Power over Ethernet plus end-...
3. Product Outlook 3.1 Front View There are one RJ45 twisted-pair jack (auto-MDI/MDI-X), one 100/1000X fiber- optic SFP slot and four LED indicators, and one DIP switch for BT/UPOE/Legacy PoE power feeding options. 10/100/1000T Fiber LNK/ PoE- 100/1000X in-Use PoE++ UPOE LNK/ Legacy...
Page 7
100/1000BASE-X SFP Slot Color Function To indicate the link through fiber port is successfully established. Fiber To indicate the fiber port is actively sending or Blink Green LNK/ACT receiving data. To indicate that the fiber optic port is linked down. DIP Switch PoE Mode Function This mode makes the GUP-805A series fully support IEEE (Default) 802.3af/at/bt standards. This mode makes the GUP-805A series fully support Cisco UPoE UPOE or PoH standards The legacy detection is to identify the valid current signature of...
3.3 Rear View There is also one DC 52V ~ 55V power socket for the GUP-805A series Gigabit Ethernet 802.3bt PoE++ Media Converter. 52-55V Figure 2: Rear Panel of the GUP-805A Series 3.4 Power Information The power jack of the Gigabit Ethernet 802.3at PoE+ Media Converter measures 2.1mm in diameter, and comes with DC 52V~55V power input.
4. Installing The Converter To install the GUP-805A series, simply complete the following steps: Ethernet Installation Step 1: Turn off the power of the device/station in a network to which the GUP-805A series will be attached. Step 2: Ensure that there is no activity in the network. Step 3: Attach fiber cable from the GUP-805A series to the fiber network.
Page 10
The GUP-805A series equips an AC-DC adapter with DC 52V~55V input and it injects the DC power into the pin of the twisted-pair cable (Pins 1, 2, 3 6 and Pins 4, 5, 7, 8). 550m~120km 100m GUP-805A-60W(95W) Data Data Power 1000...
Page 11
System, PTZ (pan, tilt & zoom) network cameras, PTZ speed dome, color touch-screen IP phones, multi-channel wireless LAN access points via PLANET IEEE 802.3bt/802.3at Power over Ethernet Splitter (POE-173S/162S/161S) over a long distance if necessary. 550m~120km 100m GUP-805A-60W(95W) Data Data Power 1000 Fiber Switch Power DC 802.3bt...
5. Duplex Mode Support The GUP-805A series TP port supports triple speed -- 10/100/1000BASE-T auto-negotiation. It will auto detect the link speed and the duplex mode by default with its link partner. The fiber port (100/1000BASE-FX/SX/LX) allows 100/1000Mbps full duplex by auto-negotiation. Please also check the setting of the link partner as well.
7. Product Specifications Model GUP-805A-60W GUP-805A-95W Interface 10/100/1000BASE-T Ethernet RJ45 interface Auto- Copper Port negotiation, auto MDI/MDI-X with PoE injector function SFP Interface 100/1000BASE-X SFP interface Fiber Mode May vary on SFP Module Fiber Port Type SFP, LC type (connector) Fiber Maximum Distance May vary on SFP Module Power Over Ethernet IEEE 802.3af Power over Ethernet PSE...
Page 15
DC 52V~55V Power Socket, external AC-to-DC Power Supply adapter Installation Wall-mount or DIN-rail installation (Optional) Layer 2 Features Switch Architecture Store-and-Forward Forwarding Rate Non-blocking full wire-speed forwarding rate Back pressure for half duplex mode Flow Control IEEE 802.3x pause frame for full duplex mode Maximum Frame Size Standards Conformance Regulatory Compliance...
8. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.