Planet Networking & Communication ICS-100 User Manual page 29

• Inactive Timeout
Example: Use Microsoft Windows Hyper Terminal, TCP/IP Winsock mode
HyperTerminal is a program that you can use to connect to other computers, Telnet sites, online services, and host
computers, using either your modem, a null modem cable, a Console cable or Ethernet connection.
The users want to use the TCP Server mode to connect to a Ethernet Switch via Hyper Terminal, Winsock mode
1. Setup Operation Mode and Serial Port of ICS-10x
2. Hyper Terminal set up a new connection with the TCP/IP Winsock
Setup Operation Mode and Serial Port of ICS-10x
1. From the WEB interface, set the Serial operation mode of ICS-10x to "TCP Server" and set the TCP Port Number to
"23".
2. Set the Serial Port Configuration of ICS-10x as below:
Mode:
Baudrare:
Character Bits:
Parity Type :
Stop Bit :
Hardware Flow Control:
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter "0".
Figure 4-14 Example: TCP Server Configuration screen
RS-232
9600
8
none
1
none
-25-
User's Manual of ICS-10x