Table of Contents
Advertisement
Please refers to APPENDIX-A for detailed wiring information of the ICS-10X.
To prevent from optic acceptor malfunction, check the both wires / transmitter before power on the
converter.
2.2.2 Chassis Installation and Rack Mounting
To install the Media Converter in a 10-inch or 19-inch with standard rack, follow the instructions described below.
Step 1: Place your ICS-10X on a hard flat surface, with the front panel positioned towards your front side.
Step 2: Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis.
Step 3: Attach a rack-mount bracket to each side of the Chassis with supplied screws attached to the package.
Figure 2-7 ICS-102 / ICS-102S15 stand alone installation
Figure 2-8 Insert a Media Converter into an available slot
-11-
User's Manual of ICS-10x
Advertisement
Table of Contents
