Table of Contents
Advertisement
The ICS-10X Web Smart Media Converter provide Web interface for Converter smart function configuration and make the
Converter operate more effectively - They can be configured through the Web Browser. A network administrator can
manage and monitor the ICS-10x from the local LAN. This section indicates how to configure the Media Converter to
enable its smart function.
4.1 Main Menu
After a successful login, the main screen appears, the main screen displays the converter Welcome page. The screen in
Figure 4-1 appears.
As listed at the left of the main screen, the configurable smart functions are shown as below:
System –
Network Configuration-
Operation Mode –
Serial Port Configuration- Setup the serial port value
4. WEB CONFIGURATION
Figure 4-1 Web Main screen
Check the hardware, software version and System MAC address and IP address
of the converter. And the password changed firmware upgrade / Factory default /
system reboot.
Setup the IP address of the converter.
Setup the serial port mode: "TCP server", "TCP client", "UDP client", "Virtual
COM", "Telnet Server", "Pair Connection – Remote (Master)" and "Pair
Connection – Remote (Slave)".
-16-
User's Manual of ICS-10x
Advertisement
Table of Contents
