Planet Networking & Communication ICS-100 User Manual page 31

4. On the File menu, click New Connection.
5. In the Name box, type a name that describes the connection.
6. In the Icon box, click the appropriate icon, and then click OK.
7. In the Connect To dialog box, choose which port or modem you want to use in the Connect using drop-down box.
8. In this case we are connecting via TCP/IP (Winsock), enter the host address and port number, and then click OK.
9. If the Port Settings dialog box is displayed, complete the information, and click OK.
Figure 4-17 Example: Hyper Terminal – Create new connection
Figure 4-18 Example: Hyper Terminal – Connect type
-27-
User's Manual of ICS-10x