RS-232 / RS-422 / RS-485 over
Fast Ethernet Media Converter
Cost effective solution for RS-232 / RS-422 / RS-485 to Ethernet
application
PLANET ICS-10x series Media Converter / Device Server provide to
converts Serial RS-232 / RS-422 / RS-485 communication interface over
Fast Ethernet networking. There are RJ-45 and SC connectors and single-
mode/multi-mode media for your needs. Ethernet signal that allows two
types of segments to connect easily, efficiently and inexpensively. This
converter can be used as a stand-alone unit or as a slide-in module to the
PLANET Media Converter Chassis (MC-700, MC-1000 and MC-1500). It's
time saving expense for user and SI, no need to replace the existing Serial
equipment and software system.
Extend distance
It extends the distance of deploying Serial equipments and hosts.
The selectable fiber-Optic wires on the basis of distance are provided.
Therefore, this product will perfectly satisfy the diverse demands while
providing reliable and efficient network solutions based on the distance
and budgets of installation.
Remote Manageable
The ICS-10x make connected Serial equipment becomes IP-based. That
also makes them be able to connect to a TCP/IP networking immediately.
Each Web-Smart converter is able to manage Web Interface. The powerful
Web-Smart Media Converter supports Application mode, Serial operation
mode connect alarm and IP address, etc. It helps reduce the amount of
valuable time that a network administrator spends detecting and locating
network problems, otherwise it requires visual inspection of cabling and
equipment. Multiple connection options for large networking environment
are available as well.
Data Sheet
1
Key Features
SERial intERfaCE
•
One RS-232/422/485 port to one 10/100Base-TX or 100Base-FX
Media Converter
•
Cost effective solution for RS-232 to Ethernet application
•
Supports RS-232, 4-wire RS-422 or 2/4-wire RS485 operation
•
Asynchronous serial data rates up to 921600b/s
EthERnEt intERfaCE
•
Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX,
100Base-FX standard
•
Supports auto MDI/MDI-X function on RJ-45 Port
•
Choice of fiber-connector from SC, multi-mode / single-mode
fiber
SMaRt funCtionS
•
Standard TCP/IP interface and versatile operation modes
•
Software Protocol Support ARP, ICMP, TCP/IP, UDP, HTTP server,
DHCP client, Telnet server/client
•
Built-in IP-Base Web interface for remote management
•
Serial Operation mode selected via Web management
•
Pair Connection mode for connecting two serial devices over a
network
•
PLANET Smart Discovery utility automatically finds xxx devices
on the network
•
Firmware upgrade via HTTP protocol
haRdwaRE
•
Compact size for easy Installation:
> Standalone - Wall mountable or DIN-Rail mounting (Optional
accessory)
> Co-work with PLANET MC family Media Chassis ( MC-
700/1000R/1500)
•
LED indicators for easy network diagnose
•
Reset Button at the front panel for reset to factory default
ICS-100
ICS-102
ICS102-S15