Table of Contents
Advertisement
4.4.2 TCP Client mode
When the ICS-10x be configured to TCP Client mode, it allows Serial device that connected to serial port of ICS-10x to
establish TCP communication actively over Intranet or Internet network between:
Remote Host (Computer) with Serial applications using TCP/IP network socket programs
Other ICS-10x with TCP Server mode
After the data has been transferred, the ICS-10x can disconnect automatically from the Remote Host depends on the TCP
Inactive timeout settings. The parameter defines the maintenance status for listen for the TCP connection
The screen in Figure 4-22 appears. When the changed operation mode, the user should be changed the Serial Port
Configuration.
The page includes the following fields:
• Remote Host IP
Address
• Remote Host Port
Number
• Inactive Timeout
Figure 4-21 TCP Client Mode
Figure 4-22 TCP Client Configuration screen
Allow the ICS-10X to connect actively to the remote host whose IP address is set
by this parameter.
The remote host port number that ICS-10X uses to listen to connections and that
other device must use to contact ICS-10X. To avoid conflicts with well known
TCP ports, the default is set to "1024".
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter "0".
-29-
User's Manual of ICS-10x
.
Advertisement
Table of Contents
