State 5: Java Application Active, General Purpose I/O And I2C; State 6: Java Application Active, General Purpose I/O And Spi; Figure 8: Module State 5; Figure 9: Module State 6 - Siemens TC65 JAVA User Manual

TC65 JAVA User's Guide
Strictly confidential / Draft
4.4.1.5

State 5: Java Application Active, General Purpose I/O and I2C

The Java application is active, ASC0 is used as System.out and the Java instance of the
RS-232 serial interface is connected to ASC1. The Java application is activated with at^sjra.
The I/O pins are configured by at^scpin. Refer to the AT Command Set [4] for AT command
details.
Java access to serial
System.out
interface (CommConnection)
ASC 0
ASC 1

Figure 8: Module State 5

4.4.1.6

State 6: Java Application Active, General Purpose I/O and SPI

The Java application is running, ASC0 is used as System.out and the Java instance of the
RS-232 serial interface is connected to ASC1. The Java application is activated with at^sjra
(refer to AT Command Set [4]).
Java access to serial
System.out
interface (CommConnection)
ASC 0 ASC 1

Figure 9: Module State 6

TC65 JAVA User's Guide_V01
AT parser 0
AT parser
with CSD
without CSD
Java AT command API
Java AT command API
with CSD
without CSD
AT parser 0 AT parser
with CSD without CSD
Java AT command API Java AT command API
with CSD without CSD
Page 22 of 69
s
AT parser
without CSD
Java AT command API
up to 10 GPIO pins:
without CSD
AT parser
without CSD
Java AT command API
up to 10 GPIO pins
without CSD
I2C:
SPI
11.03.2005