Table of Contents
Advertisement
1. Press
2. Press and hold
then shows " CLr M ", "
not clear memory.
3. Press
4. Press
4-8 Setting current data and time
1. Press
2. Press
position "hh:mm:ss" or "YY/MM/DD".
3. Press
date "YY/MM/DD".
4. Press
Please refer to software manual (CD-ROM), use PC to clear
memories data, the meter can not clear memories data free from lost
memories data.
5.
MEASUREMENT PREPARATION
5-1 Battery Loading
Remove the battery cover on the back and put a 9V battery inside.
5-2 Battery Replacement
When the battery voltage drops below the operating voltage, the mark
+
appears. If it appears, the battery should be replaced with a new
one. If the battery is fresh, the battery capacity indication "
have 5 segments will be displayed.
to turn off the meter.
to select "
to clear memory and exit.
key to enter this mode, the "SEt" mark is displayed.
or
key to move flashing two digit to desired setting
or
keys to set the current time "hh:mm:ss" and current
key to store setting value and exit.
and turn on the meter again, the display
" and "
", press
" to clear memory.
21
key will exit and
" symbol
Advertisement
Table of Contents
