Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PCE Instruments PCE-CT 24FN
Summary of Contents for PCE Instruments PCE-CT 24FN
- Page 1 User Manual PCE-CT 24FN Coating Thickness Gauge User manuals in various languages (français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com Last change: 16 November 2020 v1.0 © PCE Instruments...
-
Page 2: Table Of Contents
Operation ....................4 On / off ..........................4 Menu (settings) ........................ 4 Menu levels ........................5 Measurement ........................6 Display indication ......................7 Rotate display .........................10 Memory ...........................10 Calibration ........................11 Error messages .......................12 Warranty ....................12 Disposal ....................12 © PCE Instruments... -
Page 3: Safety Notes
We expressly point to our general guarantee terms which can be found in our general terms of business. If you have any questions please contact PCE Instruments. The contact details can be found at the end of this manual. © PCE Instruments... -
Page 4: Specifications
Dimensions Weight approx. 136.9 g / <1 lb with batteries Delivery scope 1 x coating thickness gauge PCE-CT 24FN 6 x different reference foils 1 x set of calibration standards (Fe and NFe) 3 x 1.2 V batteries 1 x micro USB cable... -
Page 5: System Description
System description ① ⑥ Display ② ⑦ Down USB socket ③ ⑧ On / Off, Menu Battery compartment ④ ⑨ Back Sensor ⑤ OK / Enter © PCE Instruments... -
Page 6: Preparation
Down" keys. Depending on the option, you can press the "⑤ OK" key to change an option directly or to move to the next lower menu level. Proceed in the same way in the lower menu levels. © PCE Instruments... -
Page 7: Menu Levels
Measured Value + Trend Graph On / Off Measured Value + Statistics On / Off Measured Value + Last Value (reading+ last few readings) On / Off Measured + Bar Graph On / Off © PCE Instruments... -
Page 8: Measurement
To switch to the measurement mode "continuous measurement", proceed as described in the menu. The setting "continuous measurement" is indicated by "CTN" on the left-hand side of the display. Traces and scratches can occur on the measured object during continuous measurement. © PCE Instruments... -
Page 9: Display Indication
Base material: Fe = magnetic / nFe = non-magnetic • Measuring mode: SNG = Single measurement / CTN = Continuous measurement Middle part: • Current reading Lower part: • Unit of measurement mm / µm / mil © PCE Instruments... - Page 10 Base material: Fe = magnetic / nFe = non-magnetic • Measuring mode: SNG = Single measurement / CTN = Continuous measurement Middle part: • Current reading / unit of measurement Lower part: • Graph with limit value setting © PCE Instruments...
- Page 11 Upper limit value Low: Lower limit value Sdev: Deviation CV%: Percentage deviation Sdev and CV% are calculated from the last max.100 measured values. Measured value + last measured values Lower part • Readings of the last few measurements © PCE Instruments...
-
Page 12: Rotate Display
With the "Save Data" option, you can copy the 100 most recently measured values from the short- term memory to the long-term memory. The "Clear Data" option deletes the measured values from the short-term memory. Press the "③ On / Off, Menu" key to return to measuring mode. © PCE Instruments... -
Page 13: Calibration
Place the meter on the film in the same way as for a measurement. The gauge will perform a few measurements. Correct the displayed value with the keys "① Up" or "② Down" and confirm the setting with the "⑤ OK" key. © PCE Instruments... -
Page 14: Error Messages
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations. If you have any questions, please contact PCE Instruments. © PCE Instruments... - Page 15 PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17...