Ip Configuration - Planet SGSW-2402 User Manual

♦ Baud
♦ Parity
♦ Data bits
♦ Stop bits
♦ Flow Control: none
Once the terminal has connected to the device, power on the device. The terminal will display that it is
loading the firmware. Then, the screen as below will show up:
Press "Enter" and input the password. The default password is "admin".

2.5 IP Configuration

Once log on to the console, the "Command>" prompt will be shown. You can type "help" for all available
commands.
: 38400
: None
: 8
: 1
6