4.2.10. Sys Set Link_Info <On|Off; Sys Reset System - Planet SGSW-2402 User Manual

4.2.10. sys set link_info <on|off>
This command is used to report the link status of the ports. Once it is enabled, it will prompt the port status
on the console. Or if you disable it, it will not prompt the port status any more.

4.2.11. sys reset system

This command will reboot the SGSW-2402.
Figure 4-13 SGSW-2402 system link report setting Screen
Figure 4-14 SGSW-2402 reset system Screen
48