Cord And Service; Power Supply Cordsets; North American Power Supply Cordsets - Intel S7000FC4UR Manual

2.2

Cord and Service

The following criteria should be used for the wire cord and AC service selection for the Intel
Server System S7000FC4UR. Verified your selection for the safety requirements of each
application with a certified safety and regulatory professional.
In North America, the cord must be UL Listed/CSA Certified, 16/3, type SJT/SO, with
NEMA 6-15P or equivalent attachment plug and IEC 320 C13 plug outlet.
Outside of North America, the cord must be flexible VDE certified or HAR rated 250V, 3
x 1mm minimum conductor size with IEC 320 C13 outlet, and rated for no less than the
product ratings. The AC wall attachment plug shall be a three conductor grounding type,
rated at 125% of the total input current rating and must be for the configuration of the
specific region or country. The AC wall attachment plug must bear at least an accepted
safety agency certification mark for the specific region or country.
The cord must be no longer than 4.5 meters (14.76 feet).
Do not attempt to modify or use an AC power cord that is not the exact type required.
3.

Power Supply Cordsets

The vendor information below helps you identify a supplier for a suitable power cordset. The
selections are assembled cordsets, not raw parts. Check your power source electrical outlets to
determine suitability and verify the safety requirements of each application with a certified safety
and regulatory professional.
3.1

North American Power Supply Cordsets

Table 1. Interpower Corporation North American Cordset
Part Number
Contact Telephone Number
Vendor Website
Equipment End
Supply End
Current Rating
Voltage Rating
Length
2
Intel® Server System S7000FC4UR Power Supply Specification
86221590
1-800-662-2290
http://www.interpower.com/
IEC 60320 C13
NEMA 5-15
15 A
125 VAC
2.5 meters
®
Revision 1.0