GE UR Series F60 Instruction Manual page 131

5 SETTINGS
Changes to the DNP / IEC 60870-5-104 point lists will not take effect until the F60 is restarted.
NOTE
g) IEC 61850 PROTOCOL
PATH: SETTINGS PRODUCT SETUP
IEC 61850 PROTOCOL
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The F60 Feeder Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2
for additional details. The IEC 61850 protocol features are not available if CPU Type E is ordered.
The F60 supports the Manufacturing Message Specification (MMS) protocol as specified by IEC 61850. MMS is supported
over two protocol stacks: TCP/IP over ethernet and TP4/CLNP (OSI) over ethernet. The F60 operates as an IEC 61850
server. The Remote Inputs/Outputs section in this chapter describe the peer-to-peer GSSE/GOOSE message scheme.
The GSSE/GOOSE configuration main menu is divided into two areas: transmission and reception.
PATH: SETTINGS PRODUCT SETUP
GSSE / GOOSE
CONFIGURATION
MESSAGE
The main transmission menu is shown below:
GE Multilin
COMMUNICATIONS IEC 61850 PROTOCOL
GSSE / GOOSE
CONFIGURATION
SERVER
CONFIGURATION
IEC 61850 LOGICAL
NODE NAME PREFIXES
MMXU DEADBANDS
GGIO1 STATUS
CONFIGURATION
GGIO2 CONTROL
CONFIGURATION
GGIO4 ANALOG
CONFIGURATION
REPORT CONTROL
CONFIGURATION
XCBR
CONFIGURATION
COMMUNICATIONS IEC 61850 PROTOCOL
TRANSMISSION
RECEPTION
F60 Feeder Protection System
5.2 PRODUCT SETUP
GSSE/GOOSE CONFIGURATION
5
5-19