LED of GSD-802PS
■
LED
Color
PWR
Green
PoE In Use
Orange
1000
Green
LNK/ACT
10/100
Green
LNK/ACT
To press and release the RESET button. The Gigabit Ethernet Switch will back to the factory default
Notice:
mode. Be sure that you backup the current configuration of Gigabit Ethernet Switch; else the entire
configuration will be erased when pressing the "RESET" button.
2.1.4 Switch Rear Panel
The rear panel of the Gigabit Ethernet Switch indicates an AC inlet power socket, which accepts input power from 100 to
240VAC, 50-60Hz.
Lights to indicate that the Switch is powered on.
Lights to indicate the port is providing 48VDC in-line power.
Lights to indicate that the Switch is successfully connecting to the network at 1000Mbps.
Blinks to indicate the Switch is receiving or sending data.
Lights to indicate that the Switch is successfully connecting to the network at 10/100Mbps.
Blinks to indicate the Switch is receiving or sending data.
Figure 2-5 PLANET GSD-802PS LED panel
Figure 2-6 Rear Panels of GSD-800S / GSD-802S
Figure 2-7 Rear Panel of GSD-802PS
User's Manual of GSD-800S / GSD-802S / GSD-802PS
Function