Dscp Qos Mode - Planet GSD-802S User Manual

4.9.2 DSCP QoS Mode

DiffServ Code Point (DSCP) － is the traffic prioritization bits within an IP header that are encoded by certain applications
and/or devices to indicate the level of service required by the packet across a network.
The DSCP Configuration page provides fields for defining output queue to specific DSCP fields.
Select the QoS mode to DSCP, the DSCP to queue mapping configuration page appears, as the Figure 4-40 shows.
The page includes the following fields:
• Prioritize Traffic
• DSCP Value
( 0..63)
• Priority
Figure 4-40 DSCP QoS Configuration screen
The draw menu allows customization of DSCP to Traffic classifiers. Total 5
selections for the Prioritize Traffic.
• Custom – Manual mapping the DSCP to the 4-level queues. Setup at the
next table.
• All Low Priority
• All Normal Priority - mapping all IP DCSP header packets to Queue 1
• All Medium Priority - mapping all IP DCSP header packets to Queue 2
• All High Priority
The values of the IP DSCP header field within the incoming packet.
The traffic forwarding queue to which the DSCP is mapped. Four traffic priority
queues are supported.
The queue to which packets with the specific DSCP value is assigned. The values
are low,Normal,Medium and High.
• Low
= Queue 0
• Normal = Queue 1
• Medium = Queue 2
• High
= Queue 3
User's Manual of GSD-800S / GSD-802S / GSD-802PS
- mapping all IP DCSP header packets to Queue 0
- mapping all IP DCSP header packets to Queue 3