Mac Filter Screen - ZyXEL Communications LTE3302-M432 User Manual

Table 27 Configuration > Network > Wireless LAN > More AP: Edit (continued)
LABEL
Intra-BSS Traffic
WMM QoS
Security
Security Mode
Cancel
Apply

7.5 MAC Filter Screen

The MAC filter screen allows you to configure the LTE Device to give exclusive access to devices (Allow)
or exclude devices from accessing the LTE Device (Deny). Every Ethernet device has a unique MAC
(Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the
devices to configure this screen.
To change your LTE Device's MAC filter settings, click Configuration > Network > Wireless LAN > MAC
Filter. The screen appears as shown.
Chapter 7 Wireless LAN
DESCRIPTION
A Basic Service Set (BSS) exists when all communications between wireless clients or between a
wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless
clients can access the wired network and communicate with each other. When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot communicate with each
other.
Check this to have the LTE Device automatically give a service a priority level according to the
ToS value in the IP header of packets it sends.
WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which
makes them run more smoothly.
Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this wireless network.
The wireless clients which want to associate to this network must have same wireless security
settings as this device. After you select to use a security, additional options appears in this
screen. See Section 7.3 on page 73
can select No Security to allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Click Cancel to reload the previous configuration for this screen.
Click Apply to save your changes back to the LTE Device.
LTE3302-M432 & LTE3312-M432 User's Guide
for detailed information on different security modes. Or you
80