Siemens SIMATIC ET 200SP Manual page 24

Technical specifications
6.1 Technical specifications
Article number
Relay outputs
Number of relay outputs
•
Rated supply voltage of relay coil L+ (DC)
•
Current consumption of relays (coil current
•
of all relays), max.
Switching capacity of contacts
– with resistive load, max.
– Thermal continuous current, max.
– Switching current, min.
– Rated switching voltage (DC)
– Rated switching voltage (AC)
Cable length
shielded, max.
•
unshielded, max.
•
Isochronous mode
Isochronous operation (application synchro-
nized up to terminal)
Interrupts/diagnostics/status information
Diagnostics function
Substitute values connectable
Alarms
Diagnostic alarm
•
Diagnostic messages
Monitoring the supply voltage
•
Wire-break
•
Short-circuit
•
Diagnostics indication LED
Monitoring of the supply voltage (PWR-
•
LED)
Channel status display
•
for channel diagnostics
•
for module diagnostics
•
Potential separation
Potential separation channels
between the channels
•
between the channels and backplane bus
•
between the channels and the power sup-
•
ply of the electronics
24
6ES7132-6GD51-0BA0
4
24 V
40 mA
2 A
2 A
1 mA; 5 V DC
24 V
24 V
1 000 m
200 m
No
Yes
Yes
Yes
Yes
No
No
Yes; green PWR LED
Yes; Green LED
No
Yes; green/red DIAG LED
Yes
Yes
Yes
Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)
Manual, 09/2017, A5E32855952-AB