Parameters/Address Space; Parameters - Siemens SIMATIC ET 200SP Manual

Parameters/address space

4.1

Parameters

RQ 4x24VUC/2A CO ST parameters
Specify the module properties with the various parameters in the course of your STEP 7
configuration. The following table lists the configurable parameters. The effective range of
the configurable parameters depends on the type of configuration.
The following configurations are possible:
● Central operation with an ET 200SP CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation with PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameters to the module by means of data records (see chapter Parameter assignment
and structure of the parameter data record (Page 26)).
Table 4- 1 Configurable parameters and their defaults (GSD file)
Parameter
Diagnostics
No supply voltage L+
Channel activated
Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)
Manual, 09/2017, A5E32855952-AB
Value range
Disable
•
Enable
•
Disable
•
Enable
•
Default Reconfig-
uration in
RUN
Disable Yes
Enable Yes
Scope with configuration software,
e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Module Module
Channel Channel
4
1
15