Siemens SIMATIC ET 200SP Manual page 12

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 4 digital outputs with floating relay changeover contacts
● Supply voltage L+
● Output current per output 2 A
● Normally open contact (NO: normally open) and normally closed contact (NC: normally
closed)
● Assignable substitute values (per channel)
● Configurable diagnostics (per module)
● Suitable for resistive load
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
version
Function
Identification data FS01
I&M0 to I&M3
Configuration in FS01
RUN
PROFIenergy FS01
Value status FS01
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You can find additional information on the accessories in the ET 200SP Distributed I/O
System (http://support.automation.siemens.com/WW/view/en/58649293) system manual.
12
HW FW version
V0.0.0 and V14 or higher
higher with HSP 0222
V0.0.0 and V14 or higher
higher with HSP 0222
V0.0.0 and V14 or higher
higher with HSP 0222
V0.0.0 and V14 or higher
higher with HSP 0222
STEP 7
TIA Portal V5.x
V5.5 SP3 or higher
with HSP 0232 V7.0
V5.5 SP3 or higher
with HSP 0232 V7.0
V5.5 SP3 or higher
with HSP 0232 V7.0
V5.5 SP3 or higher
with HSP 0232 V7.0
Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)
GSD file
PROFINET IO PROFIBUS DP
X X
X X
X X
X X
Manual, 09/2017, A5E32855952-AB