Wiring; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Manual

Wiring

3.1

Wiring and block diagram

This section includes the block diagram of the RQ 4x24VUC/2A CO ST module with the
terminal assignments for a 3-wire connection.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
You may use and combine the different wiring options for all channels.
Note
The relay contacts of the module can only switch identical voltage potential. The AUX
terminals can only be used with an associated identical voltage or PE.
Digital output module RQ 4x24VUC/2A CO ST (6ES7132-6GD51-0BA0)
Manual, 09/2017, A5E32855952-AB
3
13